Skip to content
ATPFils 2 6 3·Shelton 6 3 6FinalATPTiafoe 2 2·Alcaraz 6 6FinalWTACherubini 5 3·Masarova 7 6FinalWTAZolotareva 6 6·Scott 2 4FinalWTABrancaccio 2 4·Costoulas 6 6FinalWTATrevisan 2 3·Reales 6 6FinalWTAOz 6 5 1·Gormaz 2 7 6FinalWTAMonnet 7 3 6·Kasintseva 5 6 0FinalATPCobolli 6 3·Medvedev 7 6FinalWTATikhonova 2 6 4·Strakhova 6 4 6FinalWTAGeerlings 6 6·Giovannini 4 0FinalATPJodar 6 2 2·Fils 4 6 6FinalATPShelton ·Zverev 11/17 - 2:30 PM ESTNBARaptors ·Knicks 11/17 - 7:30 PM ESTNBATimberwolves ·Trail Blazers 11/17 - 8:00 PM ESTNBASpurs ·Pistons 11/17 - 8:00 PM ESTNBAClippers ·Jazz 11/17 - 10:30 PM ESTNBALakers ·Hornets 11/17 - 11:00 PM ESTATPMedvedev ·Alcaraz 11/18 - 8:00 AM ESTATPTiafoe ·Cobolli 11/18 - 2:30 PM ESTATPFils ·Zverev TBDATPTiafoe ·Medvedev TBDATPCobolli ·Alcaraz TBDATPJodar ·Shelton TBDBUNBayern ·Cologne ScheduledLI1Troyes ·Le Havre AC ScheduledLALAthletic ·Espanyol ScheduledEPLMan City ·Fulham ScheduledSEAComo ·Cagliari ScheduledSEALazio ·Lecce ScheduledEPLBournemouth ·Nottm Forest ScheduledEPLAston Villa ·Sunderland ScheduledEPLChelsea ·Leeds ScheduledEPLCoventry ·C Palace ScheduledEPLSpurs ·Ipswich ScheduledSEAParma ·AS Roma ScheduledEPLNewcastle ·Arsenal ScheduledSEANapoli ·Torino ScheduledF1 🏁 Las Vegas Grand Prix · 2026-11-22UCLBodo/Glimt ·LASK Linz Scheduled
Cricket

Cricket Bowling Terms Explained: Maidens, Yorkers, Bouncers, Googlies, Wides and No-Balls

Understand cricket bowling terms including maidens, yorkers, bouncers, googlies, reverse swing, wides, and no-balls, plus their scoring and delivery rules.

360 Sport News Desk
· · 21 min read · 4,048 words
Quick answer

This guide explains cricket bowling terms including maiden overs, yorkers, bouncers, googlies, reverse swing, wides, and no-balls. It defines each term and distinguishes their scoring and delivery effects, including the run, extra ball, and usual free hit associated with a no-ball.

This guide defines cricket bowling terms used to describe completed overs with no runs conceded by the bowler, deliveries pitched at the batter’s feet, short-pitched deliveries, leg-spin deliveries, and changes in ball movement. It also explains how reverse swing differs from conventional swing, how a wide differs from a no-ball, and how a no-ball affects the batting side’s score, ball count, and free-hit status in limited-overs cricket.

Quick reference

Term In one line
Maiden over A maiden over in cricket is a completed over of six legal deliveries from which the bowler concedes no runs: nothing is scored off the bat and no wides or no-balls are bowled.
Yorker A yorker is a delivery pitched right at the batter’s feet, ideally at the base of the stumps, bowled full enough to land in the block hole just in front of the popping crease.
Bouncer A bouncer is a short-pitched fast delivery that bounces sharply toward the batter’s chest or head.
Googly A googly is a right-arm leg-spinner’s delivery that turns opposite to the stock leg break, spinning back into a right-handed batter from off to leg instead of away toward the off side.
Reverse swing Reverse swing is the late movement of an old cricket ball toward its shiny side rather than its rough side, the opposite of conventional swing.
Wide A wide is a delivery that passes too far from a batter in a normal position for the batter to reach it with a normal cricket shot.
No-ball A no-ball is an illegal delivery that gives the batting side a run and an extra ball, and in limited-overs cricket usually triggers a free hit.

What is a maiden over?

A maiden over in cricket is a completed over of six legal deliveries from which the bowler concedes no runs: nothing is scored off the bat and no wides or no-balls are bowled. Every one of the six legal balls must be delivered without a run being charged to the bowler.

How an over is completed

An over is a set of six legal deliveries bowled by one bowler from one end. After the sixth ball, the umpire calls “over,” the fielders switch sides, and another bowler bowls the next over from the opposite end. The same bowler cannot bowl two overs in succession. A wide or no-ball does not count toward the six and must be re-bowled, although it also concedes at least one run.

What prevents an over from being a maiden

No runs may be charged to the bowler:

  • The batters must not run between the wickets.
  • The batters must not hit a four or six.
  • No wides or no-balls may be bowled. Byes and leg byes are not charged to the bowler, so they do not spoil a maiden.

If the bowler’s runs-conceded figure is unchanged at the end of the over, it is a maiden. A single run off the bat, a wide or a no-ball means it is not.

Why extras matter

Byes occur when the ball passes everyone and the batters run; leg byes occur when it hits the batter’s body and they run. Neither is credited to the batter, and neither is charged to the bowler, so an over containing only byes or leg byes can still be a maiden. Wides and no-balls are different: they are charged to the bowler, so either one spoils a maiden even if the batter makes no contact.

Wicket maidens

A maiden in which the bowler takes a wicket is a wicket maiden. Two wickets in a scoreless over make it a double-wicket maiden, and three make it a triple-wicket maiden, which is rare. Maidens show pressure because a batter going longer without scoring may take a risk and get out. A run of maidens can increase the required run rate while the score remains unchanged, forcing batters into rash strokes. This allows the bowler at the other end to attack more aggressively.

Variation by format

Maidens are more common in longer matches, where batters can defend and wait. In limited-overs cricket, particularly the shortest format, batters attack almost every ball, so maidens are rarer and more valued. The definition does not change by format.

Reading maidens on a scorecard

A bowling scorecard usually lists overs, maidens, runs, and wickets, often abbreviated O-M-R-W. The line “10-3-24-2” means ten overs, three maidens, 24 runs conceded, and two wickets. The three maidens indicate that the bowler kept the batters working for every run. Together with economy rate—the average runs conceded per over—maidens provide a measure of control beyond wickets alone.

What is a yorker?

A yorker is a delivery pitched right at the batter’s feet, ideally at the base of the stumps, bowled full enough to land in the block hole just in front of the popping crease. Because it arrives underneath the bat’s swing, an accurately aimed yorker is among cricket’s hardest deliveries to score from and one of the most reliable ways to dismiss a batter.

How a yorker works

A yorker removes the batter’s room to swing. Most attacking shots require the ball to bounce in front so the bat can travel down and through the line. A yorker pitches so far up the pitch that it is almost a full toss on the ground, landing on or within a couple of inches of the crease. The batter must jam down, dig the ball out, or risk being bowled or trapped leg before wicket.

The target is small: the block hole is the patch where the batter rests the bat at the popping crease when taking guard, and hitting it consistently requires precision. A fraction short, the delivery becomes a half-volley, easy to drive. Too full, it becomes a full toss the batter can swing at freely. The margin for error is tiny.

Why it is difficult to bowl

A fast bowler must hit a target the size of a shoe box from the far end of the pitch, at speed, under pressure, and often while the batter is moving. A slightly off run-up, an early-turning wrist, or a drifting release point can turn a yorker into a low full toss. Batters can shuffle across their stumps, back away to the leg side, or advance down the pitch, changing where their feet are. Good bowlers disguise the yorker with the same run-up and action as their stock ball.

When bowlers use it

Yorkers are most common in the death overs of limited-overs cricket, when batters are seeking boundaries. A fast, accurate yorker can stop runs and build pressure. Fast bowlers also use it as a surprise weapon in Test cricket, particularly against a new batter, a lower-order tailender, or a batter who moves deep into the crease.

Main types

Bowlers vary yorkers by line, pace, and intent.

Type What it does
Toe crusher Aimed straight at the batter’s feet; forces them to lift a foot away and can clip the toes or base of the stumps.
Wide yorker Angled toward the tramline outside off stump to make the batter reach; limits leg-side power hitting.
Slower yorker Bowled full at reduced pace with a disguised grip; deceives a batter who commits early to a big shot.
Inswinging yorker Curves in late toward the stumps or pads; a classic wicket-taking ball against right- and left-handers alike.

At the death, a yorker can follow a well-directed bouncer or slower ball. The threat of the yorker may prompt a batter to commit to a shot early and be beaten by a different length. Captains may set a full, straight field for a bowler who can land the delivery on demand, trusting it to drag down the stumps or produce a dot ball.

Yorker, full toss, and half-volley

The difference is where the ball pitches. A yorker lands at the batter’s feet or the base of the stumps. A full toss does not pitch before reaching the batter, allowing a free swing and, above waist height, carrying a risk of a no-ball call. A half-volley pitches slightly shorter, leaving enough room to drive it on the up. A few inches can separate an unplayable yorker from a hittable full toss.

Common misconceptions

A yorker does not require express pace; a slower yorker at the right length can be equally effective by spoiling the batter’s timing. It does not always target the stumps, because wide yorkers deliberately aim away to restrict power. Even when the batter digs it out for no run, the yorker has achieved one of its purposes: denying runs.

What is a bouncer?

A bouncer is a short-pitched fast delivery that bounces sharply toward the batter’s chest or head. It is bowled to intimidate the batter, cramp their strokes and force a mistake. Legal within regulated limits, it is chiefly a fast bowler’s weapon.

How a bouncer is bowled

Instead of aiming a normal length several feet in front of the batter, the bowler drops the ball short, roughly halfway down the pitch. The hard surface sends it up steeply, so it reaches the batter at chest or head height rather than at the stumps. Genuine pace makes it hard to react to.

Why bowlers use it

A bouncer stops batters from settling onto the front foot, discourages easy back-foot driving and plants doubt. Bowlers often use it to set up the next ball: after being pushed back by a short one, a batter can be drawn forward and beaten by a fuller delivery such as a yorker.

The rules and limits

Playing conditions cap how often bouncers can be bowled. A fast short-pitched delivery is one that passes, or would have passed, above the shoulder height of the batter standing upright at the crease. Under ICC playing conditions, the per-over limit depends on the format.

Format Bouncers allowed per over
Test cricket Two above shoulder height
One Day International Two above shoulder height
Men’s T20 International One (second is a no-ball)

These are the standard international limits. Domestic leagues and other competitions may adopt different rules, so each event’s playing conditions are the final word.

When a bouncer becomes illegal

Exceeding the per-over limit results in a no-ball, which adds a run and, in limited-overs cricket, can bring a free hit. Beyond the count, MCC Law 41.6 lets the umpire judge short-pitched bowling as dangerous if the batter’s skill and the ball’s speed, length, height and direction make injury likely. Repeated deliveries passing above head height can be ruled unfair even within the numerical limit. The umpire issues a first-and-final warning lasting the innings; a repeat bars the bowler from bowling for the rest of that innings.

Playing the bouncer

Facing bouncers is a core batting skill. The safest options are to sway out of line or duck beneath the ball. The pull and hook are attacking responses that can send a bouncer to the boundary but risk a top edge carrying to a fielder. Good batters watch the bowler’s hand and pitch length early, decide quickly and keep their eyes on the ball.

Bouncer versus other short balls

Not every short ball is a bouncer. One that rises only to waist or rib height is often called a short ball or back-of-a-length delivery rather than a true bouncer. A beamer does not bounce and reaches the batter above the waist on the full, which is illegal. The bouncer’s defining feature is that it pitches short and climbs toward the upper body.

What is a googly?

A googly is a right-arm leg-spinner’s delivery that turns opposite to the stock leg break, spinning back into a right-handed batter from off to leg instead of away toward the off side. Also called a wrong’un or bosie, it is a legal, orthodox variation, not a trick outside the laws.

Leg spin first: what the googly departs from

A leg-spinner’s normal delivery is the leg break, bowled with a flick of the wrist and fingers. It grips the pitch and turns from the leg side to the off side for a right-hander, moving away from the bat and toward the slips. Batters learn to play for that away turn, which the googly exploits.

How a googly is bowled

The bowler keeps the leg-break grip but rotates the wrist farther over, so the back of the hand faces the batter at release. The ball comes over the top of the third finger and spins the opposite way. Arm action and much of the wrist look the same, making a well-bowled googly hard to pick from the hand. The best wrist-spinners hide the difference well enough to fool batters reading the hand or the pitch.

Which way it turns

Delivery Bowler Turn vs right-hander Danger
Leg break (stock) Right-arm leg-spin Leg to off (away) Edge to slip or keeper
Googly (wrong’un) Right-arm leg-spin Off to leg (into batter) Bowled, lbw, inside edge

Because the googly comes back in, it often threatens the stumps and pads rather than the outside edge. A batter playing for the away turn may leave a gap between bat and pad, and the ball darts through. Against a left-hander, the same googly spins away instead of in.

Where the name comes from

The googly is credited to Bernard Bosanquet, an English cricketer who developed it around the turn of the twentieth century and first used it in senior cricket around 1900. It is nicknamed the bosie or bosey in his honor, as well as wrong’un. The technique spread worldwide and remains a core weapon for leg-spinners from club to international cricket.

Reading and countering it

Batters watch the wrist and seam angle, look for a slightly higher or loopier trajectory, and stay ready to adjust to an unexpected turn. Good footwork helps: getting to the pitch of the ball reduces its deviation before reaching the bat.

Bowlers use the googly sparingly. If every ball turned the wrong way, batters would adjust, so it works best as an occasional surprise among stock leg breaks. A leg-spinner might bowl several leg breaks to lull the batter into playing for the away turn, then slip in a googly to trap them on the crease.

The threat is nearly as valuable as the ball itself because the batter must respect both possibilities on every delivery, slowing their footwork and clouding shot selection. A batter trying to survive rather than score is in greatest danger: a false shot can lead to a wicket and, if dismissed without scoring, the dreaded duck.

What is reverse swing?

Reverse swing is the late movement of an old cricket ball toward its shiny side rather than its rough side, the opposite of conventional swing. It usually appears when the ball is well worn and bowled at higher pace, letting fast bowlers move the ball unexpectedly. It is especially dangerous at the death and on dry pitches.

How reverse swing works

Swing comes from airflow over the ball’s two sides. In conventional swing, a newer ball has one shiny side and an angled seam, and curves toward its rougher side. As the ball ages, one side is polished and the other roughens. At high enough speed, a pressure difference pushes the ball toward the smoother, shinier side. Because this movement is opposite to conventional swing, batters can be deceived even when they read the shiny side correctly. The curve often comes very late in flight.

Why an old ball is needed

Reverse swing needs strong contrast between the ball’s two sides. A new ball is relatively smooth on both, leaving little difference for the air to exploit. During an innings, it roughens by bouncing on an abrasive pitch, skidding across a dry outfield, and being struck repeatedly. Within the Laws, fielders shine one chosen side with sweat and buff between deliveries, while the other wears naturally. The polished side must remain smooth and dry as the other roughens. Captains manage which bowlers get the ball and when, saving their fastest, most skillful reverse-swing bowlers for the sharpest contrast. This patient work can take dozens of overs.

Feature Conventional swing Reverse swing
Ball condition Newer, still fairly smooth on both sides Old and worn, with one rough side and one shiny side
Direction of movement Curves toward the rougher side Curves toward the shinier side
Typical speed Effective across a range of pace Usually needs higher pace to appear
When it is seen Early in an innings with a fresh ball Later in an innings once the ball is worn

When reverse swing is most effective

Reverse swing is most effective on dry, abrasive pitches and outfields, which rough up the ball faster, and later in an innings once wear has built up. It pairs naturally with the yorker: a reverse-swinging yorker that curves in late toward the base of the stumps is among the toughest balls to keep out. It is a weapon in the death overs of limited-overs cricket and in the final sessions of a Test on a worn surface.

Legality and misconceptions

Reverse swing is entirely legal and a high skill. Natural wear and permitted polishing are allowed, including shining one side with sweat. Ball-tampering is illegal: scuffing the surface with objects, bottle tops or sandpaper, or applying disallowed substances breaches the Laws of Cricket and brings penalties. The offense is tampering, not reverse swing from legitimate maintenance.

It is not inherently cheating, nor does it require only extreme pace; skilled bowlers can reverse a well-worn ball at moderate speeds. Nor is it limited to the subcontinent: conditions there help, but a sufficiently worn ball can reverse anywhere.

What is a wide?

A wide is a delivery that passes too far from a batter in a normal position for the batter to reach it with a normal cricket shot. Under Law 22 of the Laws of Cricket, the umpire signals a wide, one run is added to the batting side as an extra, and the ball must be bowled again.

What counts as a wide?

An umpire considers two questions: Did the ball pass wide of where the striker was actually standing when it was delivered? Would it also have passed wide of the striker standing in a normal batting position? If both answers are yes, and the ball was not close enough to be hit with a normal stroke, it is a wide. A ball within reach of an ordinary shot is not a wide, even if the batter chooses to leave it.

The batter’s position can affect the decision. If a batter shuffles across the stumps and leaves a gap down the leg side, a ball sliding down that side is not automatically a wide: since 2022 the umpire also judges it against where the batter stood after the bowler began the run-up and against a normal guard position. If the batter backs away toward the leg side and the bowler follows, a delivery that would otherwise be wide down the off side may be fair because it was within reach of where the batter had moved.

How is a wide penalized?

One run is added to the batting side’s total as soon as the umpire signals. It is an extra and is not credited to any batter, but it is charged to the bowler’s figures as a run conceded. The delivery does not count as one of the six legal balls in the over, so the bowler must bowl it again. A wide therefore costs the bowling side a run and an extra delivery.

Any additional runs the batters run, or those resulting from an overthrow or bye, are added on top and are also recorded as wides.

Are wides judged more strictly in limited-overs cricket?

Format How wides are judged
Test cricket Judged mainly on the leg side and by whether the ball was within reach of a normal stroke; the off side is given more latitude.
Limited-overs (ODI and T20) Marked wide guidelines on the popping crease apply on the off side, and leg-side deliveries are called strictly to discourage negative bowling.

In one-day and T20 cricket, the marked tramlines give umpires a clearer off-side reference, while deliveries drifting down the leg side past the batter are usually called. The stricter standard discourages bowlers from using deliberately unhittable lines to escape pressure. It is especially important in T20 cricket as batters shuffle across their stumps to scoop or ramp. With the batter in a normal position, a delivery that passes outside leg stump without touching the batter is usually called a wide.

Can a batter be dismissed off a wide?

Yes. A wide remains a live ball, so a batter can be run out, stumped, hit wicket, or given out for obstructing the field. A batter cannot be bowled, caught, or given leg before wicket off a wide because it passed beyond normal playing reach. Stumping is possible when a batter charges down the pitch, misses, and the wicketkeeper collects the delivery and breaks the stumps.

Common misconceptions

A ball outside off stump is not automatically a wide. Test cricket allows more room on the off side. A batter’s movement also matters, because moving across the crease can change whether a delivery is judged wide or fair. Finally, wides do not end the possibility of a dismissal because the ball is still in play.

What is a no-ball?

A no-ball is an illegal delivery that gives the batting side a run and an extra ball, and in limited-overs cricket usually triggers a free hit. It is defined by Law 21 of the MCC Laws of Cricket, with the free hit governed by ICC playing conditions.

The front-foot rule

At delivery, some part of the bowler’s front foot, grounded or raised, must be behind the popping crease. If the whole front foot lands on or beyond that line, the umpire signals no-ball for overstepping. A batter cannot be out bowled, caught, LBW or stumped off a no-ball.

Other ways to bowl a no-ball

A no-ball can also be called for:

  • Throwing, or chucking, including an elbow that straightens illegally during delivery.
  • A full toss that reaches the batter above waist height, which is dangerous.
  • A delivery that bounces more than once or rolls along the ground.
  • Breaching fielding restrictions, such as too many fielders behind square on the leg side or a wicketkeeper encroaching.

Bowling a ball that lands off the pitch can also be called.

What a no-ball costs

A no-ball adds one penalty run to the batting total and does not count among the six legal balls in the over, so it must be bowled again. Runs scored by the batter, along with any byes or leg byes, are added on top of the penalty.

Consequence Detail
Penalty run One run added to the batting total
Extra ball Delivery does not count; over is one ball longer
Free hit Next ball in limited-overs cricket (protected delivery)
Dismissals allowed Run out, obstructing the field, hit the ball twice

The free hit

In most white-ball cricket, the next delivery is a free hit. The batter cannot be dismissed bowled, caught, stumped, or LBW. Only dismissals allowed on the no-ball itself apply, chiefly run out. Fielders may not change positions unless the batters change ends. If that delivery is itself a no-ball or a wide, the free hit carries to the next legal ball. The ICC introduced the rule in 2007 for front-foot no-balls and extended it in 2015 to all no-balls in the relevant formats.

Calling and checking a no-ball

The bowler’s-end umpire signals a no-ball by extending one arm horizontally and calls loudly, so batters know they can attack without fear of most dismissals. In professional cricket, a third umpire reviews the landing on every delivery in some competitions to catch overstepping that on-field umpires might miss. Enforcement can differ between formats.

An earlier era used a back-foot rule, judged by where the rear foot landed relative to the bowling crease. The current front-foot standard more directly limits how far a bowler can steal ground. Dedicated third-umpire checks have made detection more consistent, and a missed no-ball at the death of a limited-overs innings can decide a result.

Frequently asked questions

What is a maiden over, and what is a wicket maiden?

A maiden over consists of six legal deliveries from which the bowler concedes no runs: nothing is scored off the bat and no wides or no-balls are bowled, although byes and leg byes, which are not charged to the bowler, do not spoil it. A wicket maiden is a maiden over in which the bowler also dismisses at least one batter, while a double-wicket maiden includes two wickets.

What is a yorker, and does it have to be fast?

A yorker pitches at the batter’s feet or the base of the stumps, unlike a full toss, which does not bounce and can be called a no-ball if it passes above waist height. Pace helps, but a slower yorker bowled at the right full length can also be effective because it disrupts the batter’s timing.

How many bouncers are allowed, and how is a bouncer different from a beamer?

Under standard ICC playing conditions, Test matches and One Day Internationals permit two fast short-pitched deliveries above shoulder height per over, while men’s T20 Internationals allow one; individual leagues can set their own limits. A bouncer pitches short and rises toward the batter after bouncing, whereas a beamer reaches the batter above waist height without bouncing and is called a no-ball.

What is a googly, and how is it bowled?

A googly, also called a wrong’un, bosie, or bosey, turns from the off side into a right-handed batter when bowled by a right-arm leg-spinner, opposite to a stock leg break. The bowler uses the same leg-break grip and arm action but rotates the wrist to release the ball from the back of the hand, making it spin the other way while the action appears unchanged.

How does reverse swing differ from normal swing?

Conventional swing curves toward the ball’s rougher side and usually occurs with a newer ball, while reverse swing curves toward its shinier side and typically requires an old ball bowled at higher pace. Reverse swing needs one side to become sufficiently rough through wear, and it is illegal only if players tamper with the ball or apply banned substances.

What is a wide, and how is it counted?

A wide adds one run to the batting side as an extra, and any additional runs or overthrows are also counted as wides. It is not one of the six legal deliveries in an over and must be re-bowled, although it is charged to the bowler as a run conceded.

What is a no-ball, and can a batter be dismissed by it?

The most common no-ball is a front-foot overstep, in which the whole front foot lands beyond the popping crease; a no-ball adds a penalty run and must be re-bowled. A batter cannot be bowled, caught, stumped, or given LBW off a no-ball, but can be dismissed by run out, obstructing the field, or hitting the ball twice.

When does a free hit apply after a no-ball?

In most limited-overs cricket, the delivery immediately after a no-ball is a free hit, on which the batter cannot be bowled, caught, stumped, or given LBW; dismissals such as run out can still occur. The ICC introduced the free hit in 2007 for front-foot no-balls and extended it to any type of no-ball in the relevant limited-overs formats in 2015.

360 Sport News Desk

About the author

360 Sport News Desk

The 360 Sport News Desk byline covers everything this site publishes. Rules explainers are checked against each sport’s governing body (NFL, IFAB, ICC, NBA, ITF, FIA, USGA/R&A, UFC), and mistakes are fixed in the open under our Corrections Policy.

View all articles by 360 Sport News Desk